Table of Contents
Advertisement
Setting the PC
➢
Preset to the PC mode by pressing the SOURCE (
1
Press the MENU (
Press the ... or † button to select Setup, then press the ENTER/OK (
2
button.
Press the ... or † button to select PC, then press the ENTER/OK (
3
button.
Select the required option by pressing the ... or † button, then press the
4
ENTER/OK (
) button.
Available options: Image Lock, Position, Auto Adjustment, Image
Reset
5
When you are satisfied with your setting, press the ENTER/OK (
button.
6
Press the EXIT button to exit.
◆ Image Lock: Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce picture
noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency
as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
Press the ... or † button to select Coarse or Fine, then press the
1
ENTER/OK (
Press the œ or √ button to adjust the screen quality, vertical stripes may
2
appear or the picture may be blurry. Press the ENTER/OK (
◆ Position:
Adjust the PC's screen positioning if it does not fit the TV screen.
Adjust the position by pressing the .../†/œ/√ button.
1
2
Press the ENTER/OK (
◆ Auto Adjustment:
Auto adjustment allows the PC screen of set to self-adjust to the incoming
PC video signal.
The values of fine, coarse and position are adjusted automatically.
◆ Image Reset:
You can replace all image settings with the factory default values.
) button to display the menu.
) button.
) button.
) button.
)
)
) button.
English - 27
TV
Setup
Plug & Play
)
Language
Time
Game Mode
Blue Screen
Melody
PC
More
Move
Enter
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
Enter
TV
Image Lock
Coarse
Fine
Move
Enter
TV
Position
Move
Enter
Auto Adjustment in progress
Please wait
Image Reset has completed.
Return
: English
: Off
: Off
: Off
Return
Return
50
40
Return
Return
Advertisement
Table of Contents
