Danfoss EvaKool SupaKool Instruction Manual page 11

GRAPHING
h)
The fridge is able to log data of the temperature and voltage recorded by the fridge. This can be
handy when trouble shooting. (E.g. If you have a problem once the fridge has been running for a
while you can review this data. Take a screenshot (Refer to Google on how to take a screenshot
with your model Smartphone) and then email it to Evakool for review, if necessary. )
The data is viewable after approximately 10 minutes of running. The maximum data recorded is
approximately 24 hours, worth.
Note: The temperatures recorded are in the walls so there may be some variation and delay
compared to air sensing thermometers.
Note: The voltages recorded are measured inside the fridge at the internal connectors so these will
be different to your battery/solar voltage readings.
Take note that you may have to zoom in or out to see the full graph. This can be done using your
fingers in a pinching motion.
11 | P a g e
Instruction Manual