Installing The Wall Mount; Preparing The Appliance; Charging The Battery - Medion micromaxx MD 16322 Instruction Manual

6. Installing the wall mount

The supplied wall mount provides you with the
option of securely storing the vacuum cleaner
on the wall.
 Select a space near a mains plug.
 Hold the wall mount against the installation
location and mark the positions for the two
drill holes with a pen.
 Drill 2 suitable holes in the marked positions
in order to fix the screws.
 Insert the wall plugs into the drill holes.
 Fix the wall mount to the wall using the two
screws supplied with the recess for the plug facing up-
wards.
 Insert the jack plug into the cable holder on the wall
mount as illustrated in the diagram. Pay attention here
to the recess on the plug and the guide slot on the cable
holder.
 Lock the plug in place by twisting it a quarter turn.

7. Preparing the appliance

 Remove all packaging materials from the appliance and the accessories.
 Firstly connect the cyclone insert and the dust filter together. Ensure that the
tabs on the cyclone insert fit into the recess on the dust filter.
 Fit the cyclone insert with the dust filter into the dust container so that the seal
on the dust filter closes off the dust container.
 Place the dust container onto the motor block by firstly inserting it into the
catch at the bottom of the motor block and then folding it shut until the unlock-
ing button clicks audibly into place.

7.1. Charging the battery

You can charge your vacuum cleaner using the supplied mains adapter GQ05-
096030-CG or the car charger adapter BE24L-030-096; please observe the following
steps:
NOTE!
Switch off the appliance before charging it (On/Off switch set to posi-
tion 0).
 Attach the mains adapter or the car charger adapter to the power connection on
the bottom of the vacuum cleaner.
 Connect the mains plug to the mains socket or the car charger adapter
78 of 88