Yamaha EMX62M Service Manual page 15

2-3. Remove the six (6) screws marked [160] to remove
the shield plate. (Fig.3)
2-4. Remove the fifteen (15) screws marked [40], the
nine (9) screws marked [41], and the fourteen (14)
hexagonal nuts marked [A]. (Fig.4)
2-5. Remove the twelve (12) knobs marked [50], eight
(8) knobs marked [60], the eight (8) knobs marked
[70], and the eight (8) knobs marked [80].
The mix62 circuit board 1/2 can then be removed.
(Fig.4)
Note: When placing the front panel assembly on
the table, take care not to weight the MIX62
circuit board 2/2. (Fig.5)
Top View
Bottom View
(Fig. 3)
[160] Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)
(Fig. 5)
[160]
[50]
[40] [40]
[70]
[60]
[80]
[41]
(Fig. 4)
[40]: Screw 3X25 MFZNBL (V3289800)
[41]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300)
[50]: Knob GREEN/M-GRAY (V6225300)
[60]: Knob L-GRAY/M-GRAY (V6225600)
[70]: Knob BLUE/M-GRAY (V6225400)
[80]: Knob L-GRAY/D-GRAY (V6225700)
[90]: Bind Head Screw 3.0X8 MFZN2BL (VB659000)
EMX62M
[60] [70] [90]
[40] [40] [40]
[A] [41] [A]
15