Advertisement
GETTING TO KNOW WEEGO 22
Back of Unit
Lanyard Post
5V/3A Recharge (Input) Port
CHARGE UP YOUR WEEGO 22
When you unpack your new Weego Jump Starter 22 for
the first time, charge it up to 100% using the Micro
USB Charging Cord or Car Charger provided. If using
the micro USB cord, make sure you use a USB enabled
wall adapter (like the one that comes with your
smartphone or tablet) with an output of 2.1A or greater to
charge as quickly as possible.
POWERING ON/OFF
There's a Power ON/OFF Button on the back of your
Weego 22. Make sure you turn OFF your Weego 22
after every use; leaving it on slowly drains the
battery.
Power ON/OFF Button
Battery Indicator Lights
Flashlight Button
USB Port
™
Detect-O-Matic
5V, 9V/2.4A
250 Lumen LED Lights
Smarty Clamps
®
Smarty Clamps
Indicator
Lights
Sequence:
100% Charged
80% Charged
60% Charged
40% Charged
20% Charged
It takes 2.5 hrs. to fully charge using a
2.1A USB adapter and 1.5 hours to
fully charge using the supplied 3A Car
Charger. The indicator lights will flash
one by one while the unit is charging. A
solid light indicates a completed level
of charge.
Socket
®
Advertisement
