Turning The Tv On And Off; Viewing The Menus; Storing Channels In Memory (Automatic Method) - Samsung LN46A950 Quick Setup Manual

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER

Viewing the Menus

With the power on, press the MENU button.
1
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input, Application.
Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER
icon's sub-menu. Press the EXIT button to exit.
To move to a lower menu, turn the wheel
➣
SET RESET
clockwise when the menu Display is displayed.
To move to a higher menu, turn the wheel
counterclockwise.
The on-screen menus disappear from the
➣
screen after about one minute.
Storing Channels in Memory
(Automatic Method)
Press the MENU button to display the menu.
1
Press the ▲ or ▼ button to select "Channel", then
press the ENTER
Press the ▲ or ▼ button to select "Auto Program",

then press the ENTER
Press the ▲ or ▼ button to select the antenna

connection, then press the ENTER
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Move
button on the TV.
button to access the
button.
button.
button.
Start
Start
Start
Enter Return
English-
When selecting the Cable TV system: Press the

ENTER button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among "STD", "HRC",
and "IRC". Press the ▲ or ▼ button to select "Start",
then press the ENTER
cable TV, select the cable system signal source for
both Analog and Digital.
Auto Program
Selects the cable system.
Analog
STD
Digital
STD
Move
The TV begins memorizing all available stations.

Press the EXIT button to exit.
Auto Program
Auto Program in Progress.
DTV Cable : 12 Cable : 32
TV
Auto Program
Removing scrambled channel.
DTV Cable : 16 Cable : 45
After all the available channels are stored, it
➣
starts to remove scrambled channels. The Auto
program menu then reappears.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
SET
• Auto: "Air" and "Cable" antenna signals.
button. If you have Digital
HRC IRC
HRC IRC
Start
Enter Return
Cable 38
50%
Stop
Return
Enter
VCR DVD STB
DTV Cable 41
77%
Stop
Return
Enter
RESET
button