Connecting a Digital Audio System
TV Rear Panel
1
Optical Cable (Not supplied)
Connecting an Amplifier/DVD Home Theater
TV Rear Panel
1
Audio Cable (Not supplied)
Digital Audio System
Amplifier/DVD Home Theater
English-
Connect an Optical Cable between
1
the "DIGITAL AUDIO OUT
(OPTICAL)" jacks on the TV and
the Digital Audio Input jacks on the
Digital Audio System.
When a Digital Audio System is
connected to the "DIGITAL AUDIO
OUT (OPTICAL)" jack: Decrease
the volume of the TV and adjust
the volume level with the system's
volume control.
5.1CH audio is possible when the TV
➣
is connected to an external device
supporting 5.1CH.
Each Digital Audio System has a
➣
different back panel configuration.
When the receiver (home theater) is
➣
set to On, you can hear sound output
from the TV's Optical jack. When the
TV is displaying a DTV(air) signal, the
TV will send out 5.1 channel sound to
the Home theater receiver. When the
source is a digital component such as
a DVD and is connected to the TV via
HDMI, only 2 channel sound will be
heard from the Home Theater receiver.
If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT
(OPTICAL) jack on the DVD/Blu-Ray
player or Cable/Satellite Box directly
to an Amplifier or Home Theater, not
the TV.
Connect Audio Cables between the
1
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [R-AUDIO-L]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is connected
to the "AUDIO OUT [R-AUDIO-L]"
jack: Decrease the volume of the TV
and adjust the volume level with the
Amplifier's volume control.
Each Amplifier/DVD Home Theater has
➣
a different back panel configuration.
When connecting an Amplifier/DVD
➣
Home Theater, match the color of the
connection terminal to the cable.