Cone-Fire Quick Reference - Paragon DTC 1000 Operation & Maintenance Instructions Manual

After you press the key(s) in the left column, the message to the right will appear. If after pressing ENTER , then 1 , only 4 horizontal lines
appear, your controller does not have Cone-Fire.
NO DELAY FIRE, NO ALARM. IF ALARM SOUNDS DURING FIRING, PRESS ENTER.
KEYS TO PRESS
Apply power to kiln
ENTER
ENTER
1
Cone # of choice
ENTER
1 (Fast), 2 (Med.), or 3 (Slow)
ENTER
Hold time (if any)
ENTER
ENTER
ENTER
Kiln is now firing to the cone you selected.
DTC 1000 Cone-Fire Quick Reference
DISPLAY
ErrP
IdLE
- - - -
ConE
05 Displays cone #
SPd
FASt Med or
HLd
00.00 (or hold time)
CPL IdLE and flashing temperature
- - - -
-On-
SLO
23