Button Notes
Guide Masks
Crosshair
Grids
Video Config
Color Temperature
Backlight
Aspect
System Config
Display Flip Mode
Touch Control
LUT Config
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Toggle between the following: 80%, 90%, 15:9, 4:3, 1.5:1, 1.85:1, 2:1, 2.35:1, Custom
Activates Crosshair on center of screen.
Activates grid on the screen to assist with framing.
Brightness: 0-100
Contrast: 0-100
Chroma: 0-100
Sharpness: 0-100
Tint: 0-100
5600K, 6500K, 9300K, Manual
Allows user to fine tune the intensity of the LCD Panel's backlight.
Allows user to change the aspect ratio of the image.
OSD - Language: Choose between English & Chinese for OSD.
OSD - Duration: Choose how long the menu stays active without activity.
OSD - Transparency: Choose from low, medium, high, or off.
MENU Setup - Allows 5 users to save menu settings.
System Reset - Reset Settings to factory defaults.
On/Off
H Flip - Horizontal Flip On/Off
V Flip - Vertical Flip On/Off
OSD - Flip Mode - On/Off - Allows you to flip the On-Screen display to match the video.
H Flip - Horizontal Flip On/Off
V Flip - Vertical Flip On/Off
On/Off - Allows you to enable or disable the touch screen.
Stored from USB - Access up to 20 LUTs saved from USB
USB Looks - Access 3D LUTs stored on USB drive. Press menu wheel twice on highlighted
LUT to save to device.
Function Set Up on following page.
because we're filmmakers too