Convenience Functions; Illumination Led - Pioneer XW-SX50 Instruction Manual

Contents

Convenience functions

Illumination LED

Preparations
≫ ≫
19
Playback Voice Functions
≫
You can change how the illumination LED on the
front and back of the unit blink.
1. Repeatedly press the LIGHT button to
change the way the illumination LED blink.
(Rave→Chill→Off→Rave...)
Rave: Compared to chill, the blinking is faster
and color transitions are also faster. Illumination
also modifies if kick (BassDrum) is detected in
the track.
• Kick may not be detected depending on the
connected audio device and track being
played.
Chill: Compared to rave, the blinking is slower
and color transitions are also slower. The
illumination does not change when kick is
detected if you have selected chill.
• If the unit is off, select either the mode where
LED blink randomly or LED off.
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫