Operating Instruction and Documentation Sprinter Mobil 3000 Contents Foreword ......................... 3 Record of installation ....................5 Record of handing over ................... 6 1.Introduction......................7 1.1 Installation and check of the automotive lift ............7 1.2 Information of Warning ..................7 2.Master document of the automotive lift ..............
Operating Instruction and Documentation Sprinter Mobil 3000 Foreword Nußbaum lifting systems are the result of a long time experience in the automotive lifting industry. The high quality and the superior concept ensure reliability, a long lift lifetime and above all and economic business solution.
Page 4
Operating Instruction and Documentation Sprinter Mobil 3000 The owner of the Nußbaum lifting system must ensure that operators and persons working with or around the lift occasionally conduct “refresher” courses to ensure that the appropriate operating procedures and safety precautions are known.
Operating Instruction and Documentation Sprinter Mobil 3000 Filling out and undersigned and copying this sheet and send the original to the lift manufacturer. The copy remains in the Manual. Otto Nußbaum GmbH & Co.KG Korker Strasse 24 77694 Kehl-Bodersweier Germany...
Operating Instruction and Documentation Sprinter Mobil 3000 Record of handing over The automotive lift with the Serial number:..........was installed on:..........at the firm:..........at:..............the safety was checked and the lift was started. The persons below were introduced after the installation of the automotive lift. The introduction was carried out from an erector of the lift-manufacturer or from a franchised dealer (competent person).
Operating Instruction and Documentation Sprinter Mobil 3000 1.Introduction The document ”Operating Instructions and Documentation” contains important information about installation, operation and maintenance of the automotive lift. To furnish proof of installation of the automotive lift the form ”Record of Installation” must be signed and returned to the manufacturer.
D-77694 Kehl-Bodersweier 2.2 Application The automotive lift Sprinter Mobil 3000 is a lifting mechanism for lifting motor vehicles with a laden weight of up to 3000 kg. The max. Load distribution is 3:2 in or against drive-on direction. The automotive lift is only designed for servicing vehicles.
Operating Instruction and Documentation Sprinter Mobil 3000 2.6 Drive on directions Front drive vehicle subject to alterations - 10 -...
Page 11
Operating Instruction and Documentation Sprinter Mobil 3000 rear drive vehicle subject to alterations - 11 -...
Page 12
Operating Instruction and Documentation Sprinter Mobil 3000 Piece of advice The motor of the vehicle must be always located on the stationary bearing, otherwise the vehicle can fall down. The centre of gravity of the vehicle including load must be between 100 mm and 600 mm from the stationary bearing to wards the middle of the lift.
Operating Instruction and Documentation Sprinter Mobil 3000 3.Technical Information 3.1 Technical ratings Capacity: 3000 kg Load distribution: 3:2 in or against drive-on direction (Observe the centre of gravity of the lift) max height: max. 980 mm Lifting time: approx. 11 sec without load Lowering time: approx.
Operating Instruction and Documentation Sprinter Mobil 3000 4. Safety regulations If you use the automotive lift, the German following regulations are to be considered: BGG945: Examine of automotive-lifts; BGR500 Using automotive-lifts; (VBG14). Especially the following regulations are very important: •...
Operating Instruction and Documentation Sprinter Mobil 3000 5. Operating instructions The Safety Regulations must be observed during working with the automotive lift. Read the safety regulations in chapter 4 carefully before working with the lift! If the vehicles are very short, the ramps must be taken off to guarantee that all wheels are free.
Operating Instruction and Documentation Sprinter Mobil 3000 5.2 Lowering the vehicle • Check all danger points of the lift and be sure that there are no objects or people in the working area (danger area) around the lift or on the lift.
Page 24
Operating Instruction and Documentation Sprinter Mobil 3000 Level of the oil is too low Refill if necessary. Lower the lift in the lowest position. Remove the cover of the hydraulic unit. After the fill the oil level is between the upper and low marking of the oil level gauge (approx.
Operating Instruction and Documentation Sprinter Mobil 3000 7.Inspection and Maintenance Before conducting maintenance work, preparations must be made to ensure that during maintenance and repair work there is no risk to the safety of people working on or around the lift and also that there is no risk of damage to equipment being used on or around the lift.
Operating Instruction and Documentation Sprinter Mobil 3000 After this is complete, use a suitable paint (observe the RAL Number). • Check all the safety devices of the lift. • Check the electric cable and channels for Damage. • Check that all screws and bolts are correctly torque (turning moments, see the list Pic. 19) pic 4: 7.2 How often must the lift be cleaned?
Operating Instruction and Documentation Sprinter Mobil 3000 Do not use aggressive means for cleaning the workshop floor and the automotive lift. A permanent contact with any kind of liquid is not allowed. Do not use high pressure devices for cleaning the lift.
Operating Instruction and Documentation Sprinter Mobil 3000 selected according to a floor without a surface covering. If the ground is covered with floor tiles or some other form of surface covering, the bolts must be selected according to the floor with floor covering.
Page 29
Operating Instruction and Documentation Sprinter Mobil 3000 Choice of the dowel length without floor pavement or tile surface Table to pic. Liebig-dowels Dowel type BM10-/70/40 Drilling depth Min. anchorage depth Thickness of concrete min.140 Diameter of bore Thickness of the lift-pieces...
Page 30
Operating Instruction and Documentation Sprinter Mobil 3000 Choice of the dowel length with floor pavement or tile surface Table to pic. Liebig-dowels Dowel type BM10-15/70/65 BM10-15/0/100 BM10-15/70/140 Drilling depth (mm) a 85 Min. anchorage depth (mm) b 70 Thickness of concrete (mm) min.140(*)
Operating Instruction and Documentation Sprinter Mobil 3000 First security check before installation Serial-number:_______________ Complete and leave in this manual defect veri- Kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation.................... Sticker “max. capacity”......…..
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 33
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 34
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 35
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 36
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 37
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 38
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Page 39
Operating Instruction and Documentation Sprinter Mobil 3000 Regular security check and Maintenance Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation....................
Operating Instruction and Documentation Sprinter Mobil 3000 Extraordinary security check Serial-number:_______________ Filling out and leave in this manual defect veri- kind of check right missing fication remark -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Type plate........…..…............Short operating instruction................... Warning designation.................... Sticker “max. capacity”......…..
Need help?
Do you have a question about the Sprinter Mobil 3000 and is the answer not in the manual?
Questions and answers