Freezing The Current Picture - Samsung HP-S4273C Owner's Instructions Manual

Swapping the Contents of the PIP and Main Picture
T V PIP
PIP : On
Source : TV
Swap
Size :
Position :
Channel : Air 3
Move Enter
Changing the Size of the PIP Window
T V PIP
PIP : On
Source : TV
Swap
Size :
Position :
Channel : Air 3
Move Enter
Changing the Position of the PIP Window
T V PIP
PIP : On
Source : TV
Swap
Size :
Position :
Channel : Air 3
Move Enter
Changing the PIP Channel
T V PIP
PIP : On
Source : TV
Swap
Size :
Position :
Channel : DTV AIR 3 - 0
Move Enter

Freezing the Current Picture

4. Press the ... ... or † † button to select "Swap", then press the ENTER button.
The image in the PIP window will appear on the main picture, and vice versa.
√
√ (Refer to page 30)
➢
√ If main picture is in PC mode, Swap is not available.
√
√
Return
Press the SWAP button on the remote control to interchange the main picture and the
sub picture.
5. Press the ... ... or † † button to select "Size", then press the ENTER button.
Press the ... ... or † † button to select the desired size of the PIP window, then press
the ENTER button.
➢
If main picture is in PC mode, Size is not available.
➢
You may notice that the picture in the PIP window becomes slightly unnatural when
you use the main picture to view a game or karaoke.
Return
6. Press the ... ... or † † button to select "Position", then press the ENTER button.
Press the ... ... or † † button to select the desired PIP window position, then press the
ENTER button.
➢
In Double Window (
➢
If the PIP window is set to Double Window (
size or alignment may slightly differ depending on the signal type.
Return
7. Press the ... ... or † † button to select "Channel", then press the ENTER button.
Press the ... ... or † † button at the bottom of the remote to select the desired channel
in the PIP window, then press the ENTER button.
➢
The channel can be active when the sub picture is set to TV.
▲
Air 3
Press the EXIT button to exit.
▲
Return
Press the PIP CH
1. Press the STILL button to freeze a moving picture.
➢
➢
) and Double Wide (
and buttons on the remote control to change the PIP channel.
Normal sound will still be heard. Press again to cancel.
To prevent screen burn-in, this function will automatically cancel after 5 minutes.
English-31
) modes, Position cannot be selected.
) or Double Wide ( ) mode, the screen