Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung HP-S4273C Owner's Instructions Manual

Operation

Turning the TV On and Off

Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Menu language, Channels
i
and Time will be set.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
English
Spanish
French
Move Enter
Plug & Play
Select the antennas to memorize.
Air
Cable
Air + Cable
Move Enter
Plug & Play
Select the cable system.
STD
HRC
IRC
Move Enter
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
It may take a while when your TV starts.
1. Press the POWER button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER button, then "Select the language of the OSD" menu is
automatically displayed.
2. Press the ENTER button to enter the language.
Press the ... ... or † † button to select language, then press the ENTER button.
"Select the antennas to memorize." menu is automatically displayed.
Skip
3. Press the ... ... or † † button to memorize the channels of the selected connection.
Press the ENTER button to select "Start".
➢
If the antenna is connected to ANT 2 IN (AIR), select "Air" and if it is connected to
Start
ANT 1 IN (CABLE), select "Cable".
Start
➢
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the "Air + Cable".
Start
➢
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the ... ... or † † button, then press the ENTER button.
Skip
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Skip
English-15
Continued...