Viewing An External Signal Source - Samsung HP-R4272 Owner's Instructions Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top Box, and the TV source (broadcast or cable).
Setting the Signal Source
Press the MENU button.
1
Press the ENTER button to select "Input".
➤
➤
Quick way to access viewing an external signal source :
Just press the "SOURCE" button on the remote control.
Press the ENTER button to select "Source List".
2
Press the ▲ or ▼ button to select signal source, then
3
press the ENTER button.
Press the MENU button to exit.
4
Notes
• When you connect equipment to the TV, you can choose between the following sets of jacks:
AV1, AV2, S-Video1, S-Video2, COMPONENT 1, COMPONENT 2, PC, or HDMI on the
TV's rear panel.
• HDMI input can only be selected when the external device is turned on.
T V Input
Source List : TV
Edit Name
Anynet
Move Enter
T V Source List
TV
AV1 : - - - -
AV2 : - - - -
S-Video1 : - - - -
S-Video2 : - - - -
Component1 : - - - -
† More
Move Enter
T V Source List
TV
AV1 : - - - -
AV2 : - - - -
S-Video1 : - - - -
S-Video2 : - - - -
Component1 : - - - -
† More
Move Enter
√
√
√
Return
Return
Return
49