Stand-By Mode; Pairing To Dial - Axent .ONE C PLUS User Manual

MULTI-FUNCTION DIAL

STAND-BY MODE

PAIRING TO DIAL

Press and hold the multifunction dial until ambient light off to activate the Stand-by mode.
In Stand-by mode, there is no activity for some time.
Gently tap the toilet seat lid to deactivate Stand-by mode.
Cut off the power of the intelligent toilet and then apply power to it.
After three times short «beep»,
start pairing by pressing multifunction dial repeatedly until hearing three times long «beep» from the
intelligent toilet, which means pairing successful.
Pairing has originally been done in the factory. It is only necessary after the seat or the dial has been
replaced.
17