Self-Cleaning Function; System Purge - Axent .ONE C PLUS User Manual

MULTI-FUNCTION DIAL
2
LEVEL 1

SELF-CLEANING FUNCTION

As soon as you sit down on the toilet seat, the spray arm will be cleaned with fresh water.
This function can be turned ON or OFF.
Factory setting:
When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly):
- Press and hold the multifunction dial.
- Turn it counter clockwise.
Short «beep»:
Long «beep»:
The system will always clean itself after use. This cannot be disabled.
LEVEL 1

SYSTEM PURGE

If the toilet has not been used for a long period of time, old water may be purged from the system and
replaced with fresh water.
When the multifunction dial is already at LEVEL 1 (the ambient light will flash slowly):
- Turn multifunction dial clockwise.
- You will hear one short «beep». The system purge has started.
- When the system purge is in progress, turn multifunction dial clockwise again, the system purge pro-
cess stops in the same time you'll hear one long «beep» .
The system purge process stops after 90s automatically.
Turn multifunction dial clockwise again to stop the system purge procedure immediately.
ON / OFF
Self-cleaning function is ON
Self-cleaning function is ON
Self-cleaning function is OFF
13