Troubleshooting - Samsung HP-P4261 Owner's Instructions Manual

BN68-00678A-01_104~111 2004.4.28
Before you call a service technician, please scan this list of problems and possible solutions. It may save you
time and money.
Poor picture.
Your Remote control does not
operate the PDP.
The PDP won't turn on.
There is no screen image.
The image is too light or
too dark.
The image is too large or
too small.
106
6:26 PM Page 106

Troubleshooting

Problem Possible Solution
Check all wire connections.
Press the "MODE" button to put your remote control in the "TV"
mode.
Check if the power plug is connected.
Check to see that both the PDP and the source are plugged in
and turned on.
Adjust the Brightness or Contrast settings.
Adjust the Size settings.