Comcast XR11 Start

1 Meet Your Remote
TV Power
Start XFINITY / Menu
Access Guide, Saved,
XFINITY On Demand, Apps,
Search and Settings.
Voice Remote
Setup
Program remote for Aim
Anywhere or to control your
TV or audio device.
2 Turn On Your Remote
Your remote arrives with the AA
batteries already installed, but not
activated. Here is how to power it
on for the first time.
A Pick up your remote and remove the
"Pull" tab (on back) by pulling away
from the remote. The Status LED will
Mic / Status LED blink green four times as the remote
powers up (about 5 seconds).
All Power
Voice Control
Push and hold to talk.
Back
Discover content by
channel, program or key
words.
B Turn on your TV.
C Turn on your set-top box.
Number Keys
Use predicitve text (T9) to
quickly search for content.
TV Input
Changes to the next
available input on your TV
(if programmed in Step 4)
3 Pair Your Remote for 4 Control Your TV's Power and Volume
Voice Control
A Using the list on the right, find the first 5-
Use voice control to search for networks
digit code for your TV manufacturer.
and shows, set DVR recordings, and get
recommendations. See Step 5 of this
guide for examples.
A Press and hold the Setup button (about
3 seconds) until the Status LED changes
from red to green.
B Press and hold the Setup button (about 3
seconds) until the Status LED changes
from red to green.
B Press the XFINITY button.
C Follow the on-screen instructions to enter
the 3-digit code that appears.
Once the code is correctly entered, your
XFINITY Remote is paired with the device.
C Enter the first 5-digit code for your TV
manufacturer. The Status LED should flash
green twice.
Not working? Make sure the battery tab from
your remote is removed, your TV is on and you are
entering the correct 3-digit code on your TV screen.
D Verify that the code was accepted by using
your remote to adjust volume and turn the
TV on and off.
5 Test Voice Control
Once your remote is paired with your set-
top box, you can use voice control.
Popular TV Manufacturer Codes
A Press and hold the Voice button until you
LG 10178, 11265
hear the audio tone.
Panasonic 10051, 10250
Samsung 10812, 10060
Sanyo
10154, 10159
Sony 10000, 11100
Sharp 10093, 10165
Toshiba 10156, 11156
B Speak a voice command to the remote
while continuing to hold down the button.
Vizio 11758, 11756
Try one of the suggestions below. The
Status LED will be solid blue while you
speak your command.
If your code isn't listed or you would
like to control an audio device, visit
xfinity.com/remotes.
C Release the Voice button when your
command is complete. Look at the TV for
the results of your voice command.
Not working? Try the second code listed. Still
not working? Visit xfinity.com/remotes for a
WATCH CNBC
complete list of codes or use the My Account app for
FIND The Voice
mobile (iOS/Android) or X1.
SHOW ME all Eagles games
SHOW ME all kids movies on HBO
Have an Audio Receiver or Sound Bar? If you RECORD The Biggest Loser
would like to setup your remote to control your
LAUNCH Pandora
audio device or sound bar, visit xfinity.com/
GUIDE
remotes.
WHAT SHOULD I WATCH?
WHAT'S ON NOW?
Not working? Make sure you're pressing the
Voice button while you speak into the remote,
and release it when complete.
FCC Compliance Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not used
in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
• Consult the dealer or an experienced remote control
/TV technician for help.
• It is strongly recommended that the TV be plugged
into a separate wall outlet.
The user is cautioned that changes and modifications made
to this equipment without the approval of the manufacturer
could void the user's authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
"Caution" : Exposure to Radio Frequency Radiation. Antenna
shall be mounted in such a manner to minimize the potential
for human contact during operation to avoid the possibility of
exceeding the FCC radio frequency exposure limit.
Radio Exposure Statement: This equipment complies with
the FCC radiation exposure limits set forth for devices
operating in an uncontrolled environment. This equipment
should be operated with a minimum distance of 2 cm
between the radiator and front of face. This equipment
should not be placed directly on the ear when the speaker
is active.