Fig. 1
Fig. 2
Fig. 3
Backrest and Leg Support
WARNING
To avoid entrapment, make sure to keep the
patients hair, arms and feet close to the body and
use designated grab supports during any
movement.
•
The Bolero lift bath trolley is symmetrical so that either end
can be used as the backrest, depending on the orientation of
the patient's bed. To change the orientation of the trolley
simply move the pillow to the other end. (See Fig. 1)
•
Release one of the catches and raise the side selected as
backrest to the desired angle. Make sure the backrest is
secure by checking that the backrest retainer mechanism is
in place. (See Fig. 2)
Handlebars
WARNING
To avoid entrapment, make sure to keep the
patients hair, arms and feet close to the body and
use designated grab supports during any
movement.
The Bolero lift bath trolley has two foldable handle bars as
standard equipment.
During the transfer and bath:
•
Lower the handle bar that is placed at the longest distance
from the patient's waist. (See Fig. 3)
11
Need help?
Do you have a question about the Bolero and is the answer not in the manual?