P-120/P-120S
13-3 White (Black) Key
After a key has been fit to part [F] and the key
guide, make sure that the spring is fixed to the key.
Then press part [E] of the key down. (Fig.22)
13-4 GHDcl SW L circuit board.
Tighten the seven [7] screws marked [260a] to fix
the GHDcl SW L circuit board. (Fig.15)
13-5 GH-D_SW H circuit board.
Tighten the ten [10] screws marked [260b] to fix
the GH-D_SW H circuit board. Set the slits of the
rubber contact at the marks on the frame. (Fig.15)
White key
(白鍵)
[F]
I LSI PIN DESCRIPTION( L SI 端 子 機 能 表 )
CONTENTS(目次)
G
HG73C205AFD XU947C00 SWX00B (TONE GENERATOR) ...................................... 15
G
YMZ702-D XR632A00 KSN2 (Key Scanner) ................................................................ 16
14
[E]
Key spring
Key guide
(スプリング)
(キーガイド)
(Fig.22)
13-3
白鍵 (黒鍵)
[C] 部とキーガイドに白鍵 (黒鍵) をくわえさ
せ、鍵盤の支点内側のバネ受け部に、スプリン
グが確実に入っていることを確認したら、 [B]
部の上を下方向にゆっくり押し込んで取り付け
ます。 (Fig.22)
13-4
GHDcl SWシートL
シーソードーム (接点ゴム) をフレーム裏側のス
リット部分にはめ込み、 [260a] のネジ7本を取
り付けてGHDcl SWシートLを取り付けます。
(Fig.15)
13-5 GH-D_SWシートH
シーソードーム (接点ゴム) をフレーム裏側のス
リット部分にはめ込み、 [260b] のネジ10本を取
り付けてGH-D_SWシートHを取り付けます。
(Fig.15)