Evolution Precision File Sander Original Instructions Manual page 7

www.evolutionpowertools.com
d) Wear appropriate PPE (Personal
Protection Equipment). A dust mask and
safety glasses should always be worn when
using this tool. Additional safety equipment
such as ear defenders, gloves, safety shoes
and overalls should employed as necessary.
e) Inspect the workpiece for screws and
nails etc. Remove these before operations
are attempted.
f) Only use sanding belts that are in good
condition. Do not use worn out, ripped or
damaged sanding belts.
g) Wherever possible the workpiece should
be securely clamped to prevent movement.
h) The Precision Belt Sander is designed
to be held with both hands so that it can
be run over the workpiece. Do not attempt
to clamp the Precision Belt Sander to a work
bench or similar in an attempt mimic a fixed
sanding machine.
i) Do not apply excessive force to the
machine in an attempt to slow it down
quickly after 'switch off'. Allow the belt to
slow down and stop naturally.
j) Do not eat or drink in the work area.
The sanding process can create dust that may
remain within the work area for quite long
periods. Eating and drinking in such areas can
be harmful to health.
k) If possible seal off the work area so that
dust is contained within the area. Dust will
settle and can be removed at a later date.
l) People entering the work area should
wear the appropriate PPE. Do not allow
casual visitors to enter the work area.
7
EN
FR