Related Manuals for Evolution EVOPFS400
Summary of Contents for Evolution EVOPFS400
- Page 1 ® Original Instructions Read instructions before operating this tool. www.evolutionbuild.com...
-
Page 2: Table Of Contents
® Table Of COnTenTs eC - DeClaRaTIOn Of COnfORMITy eC - Declaration of Conformity We, manufacturer and importer evolution Power Tools ltd. Important Information Venture One sheffield 12 Month limited Warranty s20 3fR Declare that the product General safety Rules... -
Page 3: Www.evolutionbuild.com
fIGURes fIG 1 fIG 2 fIG 3 fIG 4 fIG 5 fIG 6 fIG 7 fIG 8 fIG 9 fIG 10 fIG 11 fIG 12 www.evolutionbuild.com... -
Page 4: Important Information
Evolution Power Tools. Questions relating to this limited warranty should be directed to the company’s head office, or call the appropriate... -
Page 5: General Safety Rules
entangled cords increase the risk of electric GeneRal safeTy RUles shock. e) When operating a power tool outdoors, Read and understand all instructions before use an extension cord suitable for outdoor operating this product. Failure to follow use. Use of a cord suitable for outdoor use all instructions listed below may result in reduces the risk of electric shock. - Page 6 Repairs should only be carried out by qualified persons using original spare parts, otherwise considerable danger to the user may result. b) When servicing a tool, use only genuine Follow evolution replacement parts. instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.
-
Page 7: Safety Rules For Belt Sanders
WaRnInG: Do not operate machine if warning and/or instruction labels outlet socket before carrying out any adjustments, maintenance or servicing. are missing or damaged. Contact Evolution b) a damaged supply cord must be Power Tools for replacement labels. replaced by a qualified technician. -
Page 8: Machine Overview
® MaCHIne OVeRVIeW 5. sPeeD COnTROl 1. sanDInG belT Release leVeR 6. On/Off TRIGGeR sWITCH 2. belT CenTRInG COnTROl sCReW 7. sOfT GRIP aRea 3. DUsT OUTleT PORT 8. TRIGGeR lOCK bUTTOn 4. sanDInG aRM lOCKInG leVeR www.evolutionbuild.com... -
Page 9: Specification
OPeRaTIOn eVOlUTIOn PReCIsIOn fIle sanDeR note: This machine is supplied with two (2) Sanding Heads – a single wheeled head and Voltage: 230V ~ 50Hz a twin wheeled head. (fig. 1) This gives the no load speed: 300-1700 m/min... - Page 10 ® • Pull the belt release lever (located just 5. On/Off Trigger switch (fig. 9) The ‘ON/OFF’ trigger switch is located in the above the belt tracking control knob) upwards machines handle. to release the tension on the belt. (fig. 4) •...
-
Page 11: Maintenance
9. Using the machine MaInTenanCe This is a compact but powerful machine and should only be used by competent operators note: Any maintenance must be carried who have read and understood the Instruction out with the machine switched off and Manual.
Need help?
Do you have a question about the EVOPFS400 and is the answer not in the manual?
Questions and answers