Connect Devices To The Hub - NETGEAR EN106TP Installation Manual

Connect Devices to the Hub

You can connect PCs, Apple Macintosh computers, UNIX workstations, or any
device equipped with a 10BASE-T Ethernet interface to the RJ-45 ports on your
hub by using twisted pair Ethernet cables.
To connect any of the RJ-45 ports on your hub to a PC, use a regular straight-
through UTP cable. If you are connecting using port 4 on the
port 6 on the Model EN106
Normal/Uplink push button to Normal.
Note: Ethernet specifications limit the cable length between your PC
or server and the hub to 328 feet (100 meters) in length.
Model EN104TP/EN106TP/EN108TP Ethernet Hub Installation Guide
TP
hub, or port 8 on the
(The Model EN106
shown in the illustration.)
Model EN104 TP
hub,
Model EN108 TP
hub, set the
TP
hub is
8726FA