ViewSonic IFP6560 User Manual page 55

Signal Auto search:
When the function enable, once currently source lost signal, display will search
available source automatically. If there is no available signal, display will stay on
currently channel and show "No Signal".
Note: The feature may not abnormal when get a device keep 5V signal alive even
it is in power off mode. ViewBoard may always detect the device and switch to the
channel..
Signal Auto switch when plug-in a new source:
ViewBoard would switch to new channel when plug-in a new source.
No signal power off:
ViewBoard will go off when no signal for a specific time. Default is set on 10 mins.
HDMI CEC:
All HDMI support CEC function. When the function enable, ViewBoard is able to
control on/off by a HDMI CEC device.
Note: 1. "Player off then display off", "Display on then player on" are not standard
CEC command. ViewBoard may not compatible with all player. 2. "Sleep mode" not
support HDMI CEC function.
• Other settings
47