Beko BEKOMAT 32U Instructions For Installation And Operation Manual page 29

BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss
GERMANY
Phone: +49 2131 988-0
www.beko-technologies.com
EU Declaration of Conformity
We hereby declare that the products named below comply with the stipulations of the relevant directives and
technical standards. This declaration only refers to products in the condition in which they have been placed
into circulation. Parts which have not been installed by the manufacturer and/or modifications which have
been implemented subsequently remain unconsidered.
Product designation:
Type:
Supply voltage versions:
Maximum operating pressure:
Product description and function:
Low Voltage Directive 2014/35/EU
Applied harmonised standards:
The devices with working voltage of 24...48 VAC and 18...72 VDC are not in the scope of the Low-Voltage
Directive.
EMC Directive 2014/30/EU
Applied harmonized standards:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction
of the use of certain hazardous substances in electrical and electronic devices.
The manufacturer shall have sole responsibility for issuing this declaration of conformity.
Neuss, 13/10/2017
BEKOMAT® 32U
Condensate drain
BEKOMAT ® 31U, 32U, 32UV, 33U, 33UV
95...240 VAC ±10% (50...60 Hz) / 100...125 VDC ±10%
or
24...48 VAC ±10% (50...60 Hz) / 18...72 VDC ±10%
16 bar (g)
Condensate drain for the electronically level-controlled
discharge of condensate in the compressed-air system.
EN 61010-1:2010
EN 55011: 2009 + A1: 2010, group 1, class B
EN 61326-1:2013
Signed for and on behalf of:
BEKO TECHNOLOGIES GMBH
i.V. Christian Riedel
Head of International Quality Management
Declaration of conformity
29