Ez Rec Mode - Samsung DVD-R155 Instruction Manual

Press "On" to confirm EZ REC mode.
Otherwise press "Off"
On Off
Disc Initialize (DVD-V)
Now, initializing..
50%
Disc Finalize
Processing..
50%

EZ REC MODE

This function allows you Initialize and Finalize a disc automatically.
1. With the unit in Stop/No Disc mode, press the EZ REC MODE button
on the remote control.
2. Press the ◄ ► buttons to select On, and then press the ENTER
button.
The EZ REC MODE is set up.
3. Insert a disc.
If the disc is new, it will initialize automatically.
4. Press the REC button.
5. EZ REC MODE will Automatically Finalize the disc under the following
conditions.
- When you press the OPEN/CLOSE button on your DVD Recorder after
recording on at least 30% of the disc. The tray will open after the disc
has been fi nalized.
- When the disc is full, it will fi nalize automatically and the Recorder will
remain in stop mode.
- When you make a timer recording and it occupies at least 30% of the
disc, the disc will fi nalize automatically and the Recorder will power off.
Please note that auto fi nalization will not work if the Recorder has more
than one Timer Recording set in the Scheduled Record List.
■ If you insert a new DVD-RW disc, it will be formatted in V mode
after auto initializing.
■ If you select off, you must initialize (see page 35) and fi nalize the
disc manually in the Disc Manager menu.(see page 66)
■ The length of the Recording is different according to recording
mode. (see page 35)
English - 44