Connecting To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-V9700 Instruction Manual

Connecting to an
Amplifier)
1
Using a Coaxial cable or an Optical cable (not
included), connect the DIGITAL AUDIO OUT
(COAXIAL) or DIGITAL AUDIO OUT (OPTICAL)
jack on the rear of the DVD-VCR to the
AUDIO IN (COAXIAL)
(OPTICAL) jack of the
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT
of the DVD-VCR to the
IN jack of your TV as described on pages 14 to
18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The jack position may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
C
O N N E C T I O N S
Audio System (Dolby digital, MPEG2 or DTS
DIGITAL
or DIGITAL AUDIO IN
Amplifier.
OUT jacks on the rear
VIDEO or COMPONENT
Amplifier to
Optical Cable
(not included)
ENG-20
Coaxial Cable
(not included)
Dolby digital or
DTS Amp.