Connecting To An Audio System (2 Channelamplifier,Analog); Connecting To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-V6700 Instruction Manual

I
CONNECTIONS
I
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a coaxial cable mot included connect the
DIGITALAUDIO OUT (COAXIAL) jack on the
back of the DVD-VCR to the DIGITAL AUDIO IN
(COAXIAL). ack of the Amplifier.
2
Using video signal cable(s_,connect the S-VIDEO
or COMPONENT OUT acks on the back of the
DVD-VCR to the S-Vl DEO or COMPONENT IN
jack of your TV as described on pages 13 to 16.
3
Turn on the DVD-VCR.TV. and Amolifier.
AUI}D ou- O0_P_ENT IE = lINE =
VIDEO
s-vIo o o_'
@
AUOIO
Coaxial Cable
(not included)
4
Press the input select button of the Amplifier to
select externa input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier s user manual to set the
Amolifier's audio input.
coaxial
AU
Dolby digital or
DTS Amp.
Notes
When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu.
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 53 - 54)
The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
ENG-19