Connection To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung 00956L Instruction Manual

Connection to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a coaxial cable or an optical cable (not
included), connect the DIGITAL AUDIO OUT
(COAXIAL) or DIGITAL AUDIO OUT (OPTICAL)
terminal on the rear of the DVD-VCR to the
DIGITAL AUDIO IN (COAXIAL) or DIGITAL
AUDIO IN (OPTICAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-VIDEO or COMPONENT OUT
terminals on the rear of the DVD-VCR to the
VIDEO, S-VIDEO or COMPONENT IN terminal
of your TV as described on pages 15 to 18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 61 to 62)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
C
O N N E C T I O N S
Coaxial Cable
(not included)
ENG-22
Optical Cable
(not included)
Dolby digital or
DTS Amp.