Pacer Functional Overview - Nektar Pacer User Manual

Pacer Functional Overview

Preset Switch
Press and hold for 2 seconds. Then select a preset using the switches
by first selecting bank A/B/C/D, followed by preset number 1-6.
[Preset] is also the back button when navigating Pacer menus.
Power On/Off
6 Nektar Pacer User Guide
Cable Tie
Tie your USB or PSU cable.
Unscrew with screwdriver and
tighten again for secure fit.
Power Supply
Power supply socket,
9V / 600mA, center negative,
2.1mm barrel connector.
(PSU optional)
Switches A-D
Factory preset assignments for these 4 switches are:
A: Track preset (for DAW control). Default is MCU, if MCU is
activated in your DAW it will work instantly.
B: Transport preset (for DAW control). Default is MCU, if MCU is
activated in your DAW it will work instantly.
MIDI Output Jack
Connect external MIDI equipment.
Can be used as USB MIDI interface as
well as for direct control - or both.
USB Connector
Connect to USB host/computer.
Unit powered via USB.
Expression Pedal sockets 1 & 2
Connect standard expression pedals for
additional real-time control.
www.nektartech.com