Expression Pedal (Expdl); Relay Behavior (Rly); Patch Up/Down Function (Ptchf) - Nektar Pacer User Manual

Global
(continued)

Expression Pedal (EXPDL)

The default expression pedal behavior can be set globally in this menu:
• Move the [Data Encoder] until you see "EXPDL" in the display and press the [Data Encoder] to select the menu.
• Move the [Data Encoder] and choose either 1=Exp. pedal 1 or 2=Exp. pedal 2, and then press the [Data Encoder] to select.
• The display now reads "MODE". Move the [Data Encoder] to select one of the options listed in the chart on page 17..
• Press [Data Encoder] to set and revert back to the menu where you can select either expression pedal 1 or 2.
• To return to the Global menu either press [Preset] or select "Back" using the [Data Encoder].
Mode Option Expression pedal type
DEt Auto-detect. Select every time you change pedal.
1 Korg, M-Audio, Moog (pos. "Std"), Nektar (pos. 1), Roland
2 M-audio (pos. "Other"), Moog (pos. "Other"), Nektar (pos. 2), Yamaha
3 Line 6

Relay Behavior (RLY)

The default relay behavior can be set globally in this menu.
• Move the [Data Encoder] until you see "RLY" in the display and press the [Data Encoder] to select the menu.
• Press the external footswitch that you want to change the setting for, then press the [Data Encoder] to select.
• The display now reads "MODE". Move the [Data Encoder] to select on of the options listed in the chart below.
• Press [Data Encoder] to set and revert to the Global menu.
Mode Option Relay Behavior
nO Momentary, normally open
nC Momentary, normally closed
LAt Latching

Patch Up/Down Function (PTCHF)

The Nektar DAW Integration Track and Transport control presets use switches [5] and [6] to select the previous or next patch in your DAW.
However, some plugins don't respond to these messages and instead require you to send a MIDI program message. This global menu
allows you to select one or the other option:
• Move the [Data Encoder] until you see "PTCHF" in the display and press the [Data Encoder] to select the menu.
• Move the [Data Encoder] to select either "PRG" or "DAW". PRG=MIDI Program Change. DAW=DAW Patch Change.
• Press [Data Encoder] to set and revert to the Global menu.
18 Nektar Pacer User Guide www.nektartech.com