Setting Midi Channel For A Step; Led Colors - Nektar Pacer User Manual

Control Edit (cont.)
Expression Pedal Type Data Settings
Expression pedal inputs 1 and 2 have different message types as shown in the below chart.
Type Options for Exp1/Exp2
MIDI CC
MIDI NRPN Coarse
MIDI NRPN Fine
Pitch Bend
AfterTouch
Off

Setting MIDI Channel for a Step

MIDI messages can be sent on any MIDI channel from 1 to 16 or on the global MIDI channel (value=0).
• Move the [Data Encoder] until "M CHA" appears in the display, then press the [Data Encoder].
• Move the [Data Encoder] to select a value from 1-16 or 0 (Global MIDI Channel) and press the [Data Encoder] to accept the change.

LED Colors

A selection of LED colors is available for each of the 10 switches ([A]–[D] and [1]–[6]). How they are used and what they mean is user-con-
figurable. By default, each color represents an assignment type (see chart below). A color can be programmed for on and off states – or in-
stead of choosing different colors you can use the same color for both on/off with the off setting dimmed (A=full illumination, b=dimmed).
• Move the [Data Encoder] until "LED" appears in the display and press the [Data Encoder] to select it.
• Move the [Data Encoder] to scroll through the menus in the chart below and press the [Data Encoder] to select.
• Set the Value using the [Data Encoder] and press the [Data Encoder] to set it.
Chart 1
Menu Display
MIDI MIDI
On Color ONCLR
Off Color OFCLR
LED Number LEDNM
Back BACK
Chart 2 (A=full illumination, b=dimmed)
Color No Color
1A / 1b
2A / 2b
3A / 3b
4A / 4b
5A / 5b
6A / 6b
12 Nektar Pacer User Guide
Display
CC
NRPNC
NRPNF
PB
AFT
OFF
Value
Off/On
Off, 01a/b to 12 a/b, Default
Off, 01a/b to 12 a/b, Default
0-3
n/a
Default Color for Mes-
sage Type
Step select
Preset select
MIDI Program
MMC
Data 1 Data 2
MIDI CC (0-127) Min (0-127)
Value (0-127) LSB (0-127)
Value (0-127) LSB (0-127)
Value (0-127) Min (0-127)
Value (0-127) Min (0-127)
n/a n/a
Function
If On, LED on and off colors are triggered by the assigned MIDI
message received via the USB MIDI port.
Sets the color used for On/maximum value state.
Sets the color used for Off/minimum value state.
Sets which of up to 3 LED's should be illuminated on the switch.
0=default, 1=bottom, 2=middle, 3=top.
Return to Control Edit top level.
Color No Color Default Color for Message
Type
7A / 7b MIDI Note
8A / 8b DAW function
9A / 9b MIDI cc
10A / 10b Relay
11A / 11b NRPN Coarse, NRPN Fine
12A / 12b
Data 3 MIDI Channel
Max (0-127) 0=Global, 1-16
MSB (0-127) 0=Global, 1-16
MSB (0-127) 0=Global, 1-16
Max (0-127) 0=Global, 1-16
Max (0-127) 0=Global, 1-16
n/a n/a
www.nektartech.com