Ventilation Grill Assembly - Marathon MBWC24 Owner's Use And Care Manual

MBWC24-2D

Ventilation Grill Assembly

Please note that for model MBWC24-2D, the legs are adjustable to 2 inches to assist with
varied counterheights. A minimum of 34.5" height is required for the front ventilation
plate to be properly secured once installed. The stainless front ventilation grill is packaged
separately in the wine cooler. Once the wine and beverage cooler is leveled and placed
into the location, the front ventilation grill is easily installed and secured by the 4 stainless
screws included.
MBWC24-2D is designed for standard counter high installations which requires adjusting
the legs to 34.5" in order to fit the standard 5" ventilation grill. If you have a custom instal-
lation between 32.5"-34.5", a smaller 3.25" ventilation grill also comes with the unit.
MBWC24 | MWC24-D1 | MWC24-DBLS
Ventilation Grill Assembly
Please note that for model MBWC24, MWC24-D1, MWC24-DBLS, the legs are adjustable to
2 inches to assist with varied counterheights. A minimum of 34.5" height is required for the
front ventilation plate to be properly secured once installed. The stainless front ventilation
grill is packaged separately in the wine cooler. Once the wine and beverage cooler is leveled
and placed into the location, the front ventilation grill is easily installed and secured by the 2
stainless screws included.
To protect your wine and/or beverage cooler while transit, We have
carefully packed and protected the ventlation grills in the styrofoam
packaging. DO NOT DISCARD PACKAGING without removing the
stainless steel ventilation grill.
To protect your wine and/or beverage cooler while transit, We have
carefully packed and protected the ventlation grill in the styrofoam
packaging. DO NOT DISCARD PACKAGING without removing the
stainless steel ventilation grill.
Ventilation Grill Assembly
8