Table of Contents
Advertisement
MWC28-DSS | MWC56-DSS | MWC56-DBLS | MBWC56-SS | MBWC56-BLS
Congratulations on the purchase of your new Premium Wine/Beverage cooler!
To activate your Warranty, please register your appliance at www.stirlingmarathon.com
or by completing and mailing the enclosed Warranty Registration Card. We are confident
you will have years of hassle free enjoyment and ask that you please retain the Use & Care
Guide for future reference and your safety.
Before installing please, read your Use & Care guide carefully and pay special attention to the
Safety & Warning information outlined in the following pages
For immediate assistance: 1-844-309-9777
www.stirlingmarathon.com
PREMIUM WINE &
BEVERAGE COOLER
use and care guide
Owners
Advertisement
Table of Contents
Need help?
Do you have a question about the MWC28-DSS and is the answer not in the manual?
Questions and answers
The cellar light comes on all the time without the cellar door being open, why?
The light may stay on when the cellar door is closed if the light switch is set to "on," the switch is faulty, or the door is not properly closed or sealed, preventing the switch from being triggered.
This answer is automatically generated
THE BUTTONS ON MY COOLER DO NOT FUNCTION.TRIED TO CHANGE THE LOWER SECTION TEMP,TO A LOWER TEMP.NONE OF THE BUTTON WORK,TEMP,LIGHT,ETC.HOLDING THE POWER FOR 2 SECONDS DOES NOT GIVE BEEP BACK.TOP TEMP OKAY.LOW TEMP STUCK AT 64.WANT TO LOWER THIS TEMP.THANKS...
If the buttons on your Marathon MWC28-DSS cooler are not functioning and you cannot change the lower temperature, follow these steps:
1. Unlock the Buttons: Press and hold any button for 3 seconds to unlock all buttons. If there is no operation within 15 seconds, the buttons will lock automatically.
2. Adjust the Lower Zone Temperature: Press the right button to increase or decrease the temperature of the lower zone.
3. Power Cycle the Cooler: If the buttons remain unresponsive, try pressing the left and right buttons simultaneously for 3 seconds to power off, then repeat to power on.
4. Check for Electrical Issues: Ensure the power cord is properly connected and not damaged.
5. Consult a Qualified Technician: If the issue persists, seek professional assistance to avoid electrical hazards.
This answer is automatically generated