Pairing The Remote Control To The Camera - Logitech MeetUp Setup Manual

PAIRING THE REMOTE
CONTROL TO THE CAMERA
Your camera and remote control are
paired at the factory However, if you
need to pair a remote to the camera
(such as when replacing a lost
remote) do the following:
1. Press and hold button on
the back of the camera until LED
flashes blue
2. Press and hold the Bluetooth
button on the remote for
10 seconds to place it in pairing
mode
3. Once the remote and camera are
paired the LED will stop flashing
4. If the pairing fails, the LEDs will
keep flashing Start from step 2
and repeat
FOR MORE INFORMATION
You can find additional information
on MeetUp including:
– FAQs
– Software to enable functions in
various applications
– How to order replacement parts
– And more at
www.Logitech.com/MeetUp
English 9