Related Manuals for rtd ADP065
Summary of Contents for rtd ADP065
- Page 1 ADP065 USB 3.0 and SATA Adapter for PCIe/104 Type 2 User’s Manual BDM-610040015 Rev. A RTD Embedded Technologies, Inc. AS9100 and ISO 9001 Certified...
- Page 2 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com...
- Page 3 Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.
-
Page 4: Table Of Contents
USB1 & USB2: USB 3.0 Connectors SATA1 & SATA2: SATA Connectors 3.3.2 Bus Connector Bottom: PCIe Connector Selecting the Stack Order for the ADP065 ..........................10 Steps for Installing ..................................11 Functional Description Functional Diagram ................................... 12 Backwards Compatibility with USB 2.0 ............................. 12 Power ...................................... - Page 5 Figure 1: Board Dimensions (inches) ..................................8 Figure 2: Board Connectors ...................................... 9 Figure 3: Example 104™Stack ....................................11 Figure 4: ADP065 Functional Diagram ................................... 12 Table of Tables Table 1: Operating Conditions ....................................7 Table 2: Electrical Characteristics .................................... 7 Table 3: USB Port Connections ....................................
-
Page 6: Introduction
Type 2 bus. The ADP065’s utilization of a host’s PCIe/104 USB links avoids bandwidth starvation of the host’s primary USB I/O connections, making this module a useful accessory to any of RTD’s Intel Core i7, AMD Fusion G-Series, Intel Core 2 Duo, and Intel Celeron M single board computers. -
Page 7: Specifications
Power consumption does not include current drawn from connected USB devices. The 3.3V, 12V, and -12V rails are not used by the ADP065. Any requirements on these signals are driven by other components in the system. Power delivered to the USB 3.0 ports may be limited by the host cpuModule. -
Page 8: Board Connection
When removing it from the bag, hold the board at the edges, and do not touch the components or connectors. Handle the board in an antistatic environment, and use a grounded workbench for testing and handling of your hardware. Physical Characteristics STEP model is available upon request; contact RTD Tech Support for more information. Weight: Approximately 0.0204 Kg (0.045 lbs.) ... -
Page 9: Connectors And Jumpers
ONNECTORS USB1 & USB2: USB 3.0 Connectors Two USB 3.0 compliant connectors are available on the ADP065. With the ADP065 stacked above the CPU, USB2 breaks out the higher order port, and connector USB1 breaks out the lower order port. -
Page 10: Sata1 & Sata2: Sata Connectors
Selecting the Stack Order for the ADP065 The following is a list of rules to determine where the ADP065 falls within the stacking order of the system. These rules may be overridden by the devices hosting the USB 3.0 and SATA connections. -
Page 11: Steps For Installing
10. Attach any necessary cables to the PC/104 stack. 11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 3: Example 104™Stack | www.rtd.com ADP065 User’s Manual RTD Embedded Technologies, Inc. -
Page 12: Functional Description
Functional Description Functional Diagram The Figure below shows the functional diagram of the ADP065. The various parts of the block diagram are discussed in the following sections. USB 3.0 Connector USB 3.0 Connector SATA Data Connector SATA Data Connector (USB2) -
Page 13: Troubleshooting
If problems persist, or you have questions about configuring this product, contact RTD Embedded Technologies via the following methods: Phone: +1-814-234-8087 E-Mail: techsupport@rtd.com Be sure to check the RTD web site (http://www.rtd.com) frequently for product updates, including newer versions of the board manual and application software. | www.rtd.com ADP065 User’s Manual RTD Embedded Technologies, Inc. -
Page 14: Additional Information
A copy of the latest PC/104 specifications can be found on the webpage for the PC/104 Embedded Consortium: www.pc104.org PCI Express Specification A copy of the latest PCI Express specifications can be found on the webpage for the PCI Special Interest Group: www.pcisig.com | www.rtd.com ADP065 User’s Manual RTD Embedded Technologies, Inc. -
Page 15: Limited Warranty
During the one year warranty period, RTD Embedded Technologies will repair or replace, at its option, any defective products or parts at no additional charge, provided that the product is returned, shipping prepaid, to RTD Embedded Technologies. All replaced parts and products become the property of RTD Embedded Technologies. - Page 16 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com Copyright 2015 by RTD Embedded Technologies, Inc. All rights reserved.
Need help?
Do you have a question about the ADP065 and is the answer not in the manual?
Questions and answers