Related Manuals for rtd LAN24225
Summary of Contents for rtd LAN24225
- Page 1 LAN24225 and LAN34225 PCI Express Dual-Gigabit SFP/Fiber Ethernet User’s Manual BDM-610020100 Rev. B RTD Embedded Technologies, Inc. AS9100 and ISO 9001 Certified...
- Page 2 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com...
-
Page 3: Revision History
Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual. -
Page 4: Table Of Contents
D1 and D2: Link/Activity LEDs CN6: External LED Connector 3.3.2 Bus Connectors CN1(Top) & CN2(Bottom): PCIe Connector CN16: PCI Connector (LAN24225 only) Steps for Installing ..................................13 IDAN Connections Module Handling Precautions ..............................14 Physical Characteristics ................................14 Connectors....................................15 4.3.1... - Page 5 Figure 4: IDAN Dimensions ....................................14 Figure 5: IDAN Photo ......................................15 Figure 6: Example IDAN System .................................... 16 Figure 7: LAN24225 Block Diagram ..................................17 Table of Tables Table 1: Ordering Options ......................................7 Table 2: Operating Conditions ....................................9 Table 3: Electrical Characteristics ....................................
-
Page 6: Introduction
Product Overview The LAN24225 and LAN34225 are server grade, dual Gigabit Ethernet Modules. They provide two Small Form-factor Pluggable (SFP) connectors that will accept a pre-installed multi-mode Fiber SFP module, or a customer supplied SFP module. This allows the flexibility to have any combination of multi-mode fiber, single-mode fiber, or twisted pair interfaces. -
Page 7: Ordering Information
The Intelligent Data Acquisition Node (IDAN™) building block can be used in just about any combination with other IDAN building blocks to create a simple but rugged 104™ stack. This module can also be incorporated in a custom-built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition Node. -
Page 8: Contact Information
If you are having problems with you system, please try the steps in the Troubleshooting section of this manual. For help with this product, or any other product made by RTD, you can contact RTD Embedded Technologies technical support via the... -
Page 9: Specifications
= 14.0mA PCIe Bus Differential Output Voltage DC Differential TX Impedance 95.2 116.9 Ω Differential Input Voltage 0.175 DC Differential RX Impedance 92.7 115.8 Ω Electrical Idle Detect Threshold | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 10: Board Connection
Weight: Approximately 0.1 kg (0.22 lbs.) Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W) (not including SFP sockets) Figure 1: Board Dimensions | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 11: Connectors And Jumpers
Connectors and Jumpers CN16: PCI Connector (Pass-through, LAN24225 only) D1: Port 0 Link/Activity LED CN4: Port 0 D2: Port 1 Link/Activity LED CN5: Port 1 CN6: External LED Connector CN1 & CN2: PCIe Connector Figure 2: Board Connections(LAN24225ER-1 shown) 3.3.1... -
Page 12: Cn6: External Led Connector
Specification. (See PC/104 Specifications on page 19) The LAN24225 is a Type 2 board, and can connect to a Type 2 PCIe/104 connector. For an adapter to convert the x16 link on a Type 1 connector to a single x4 link on a Type 2 connector, contact the RTD Sales department (ADP055). -
Page 13: Steps For Installing
11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 3: Example 104™Stack | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 14: Idan Connections
Weight: Approximately 0.21 Kg (0.46 lbs.) Dimensions: 151.972 mm L x 129.978 mm W x 16.993 mm H (5.983 in L x 5.117 in W x 0.669 in H) Figure 4: IDAN Dimensions | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 15: Connectors
Specification. (See PC/104 Specifications on page 19) The LAN24225 is a Type 2 board, and can connect to a Type 2 PCIe/104 connector. For an adapter to convert the x16 link on a Type 1 connector to a single x4 link on a Type 2 connector, contact the RTD Sales department (ADP055). -
Page 16: Steps For Installing
11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 6: Example IDAN System | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 17: Functional Description
Driver Support For Windows XP and Windows 7, the LAN24225 is supported by an Ethernet driver provided by Intel. A copy of this driver is provided on the companion CD that is shipped with the board, and may also be downloaded from the RTD web site (www.rtd.com) or the Intel web site (www.intel.com). -
Page 18: Troubleshooting
If problems persist, or you have questions about configuring this product, contact RTD Embedded Technologies via the following methods: Phone: +1-814-234-8087 E-Mail: techsupport@rtd.com Be sure to check the RTD web site (http://www.rtd.com) frequently for product updates, including newer versions of the board manual and application software. | www.rtd.com LAN24225 and LAN34225 User’s Manual RTD Embedded Technologies, Inc. -
Page 19: Additional Information
A copy of the latest PCI Express specifications can be found on the webpage for the PCI Special Interest Group: www.pcisig.com Ethernet Controller For more information on the Ethernet Controller used on the LAN24225, refer to the Intel 82575EB Datasheet: www.intel.com | www.rtd.com LAN24225 and LAN34225 User’s Manual... -
Page 20: Limited Warranty
During the one year warranty period, RTD Embedded Technologies will repair or replace, at its option, any defective products or parts at no additional charge, provided that the product is returned, shipping prepaid, to RTD Embedded Technologies. All replaced parts and products become the property of RTD Embedded Technologies. - Page 21 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com Copyright 2015 by RTD Embedded Technologies, Inc. All rights reserved.
Need help?
Do you have a question about the LAN24225 and is the answer not in the manual?
Questions and answers