Shark ion x40 Quick Start Manual

VERSATILE CLEANING
FLOOR
Press the Power
button, then choose
your surface setting.
To activate brushrolls,
place your foot gently
on the floor nozzle and
tilt the handle back.
NOTE: Brushrolls will only engage
when the handle is tilted back.
CONVENIENT STORAGE
For convenient storage
in small spaces, release
the handvac and hook
it onto the bottom of
the wand.
EMPTYING THE DUST CUP
1. To empty dust cup, first
remove the handvac from
Wand
Release
the wand by pressing the
Wand Release button and
pulling up on the handvac.
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
SHARK ION and SMART RESPONSE are trademarks of SharkNinja Operating LLC.
ABOVE-FLOOR
Stand the vacuum upright.
Step on the Floor Nozzle
Release button and pull
the wand up to disconnect
it from the motorized
Floor Nozzle
floor nozzle.
Release
OR
Press the Wand Release
button on the top of the
wand to disconnect it from
the handheld vacuum.
Wand Release
Attach desired cleaning accessory, then
choose your Suction setting.
Wall Mount and
additional charging
options available at
sharkaccessories.com.
2. Position dust cup over
a trash bin, then open
the bottom of the
dust cup by pressing
the Dust Cup Release
button on the side.
IR141_QSG_MP_180621
Please make sure to read the enclosed Shark® Owner's Guide prior to using your vacuum.
CORD-FREE ULTRA-LIGHT
Wand
Release
QUICK
START
GUIDE
Use this Quick Start Guide
to start using your new
vacuum's great features.
For questions, visit us
online at sharkclean.com
Register your vacuum at
registeryourshark.com
IR141
ION
X40
TM