Advertisement
BOTH LIGHTS ON -
BOTH LIGHTS OFF -
REMOVE FRONT PANEL TO
ACCESS RESET BUTTONS
PULL BOTTOM
OF FRONT
PANEL OUT
AND LIFT TO
REMOVE
TROUBLESHOOTING
LOCK OUT INDICATOR ON
BOILER NOT FIRING
1
2
3
4
1
2
3
4
CHECK THE OIL LEVEL IN THE OIL
STORAGE TANK
PRESS RESET BUTTON (A) BEHIND
FRONT WHITE PANEL (SEE FIG.2).
BOILER SHOULD FIRE
IF NO RESPONSE, WAIT 2 MINUTES-
PRESS RESET BUTTON (A) AGAIN
IF LOCK OUT LIGHT STAYS ON, DO NOT
ATTEMPT FURTHER RESETS. CONTACT
YOUR SERVICE ENGINEER FOR ADVICE.
BOILER NOT ON -
NO HEATING/HOT WATER
ENSURE THERE IS A POWER SUPPLY
TO THE BOILER
CHECK THE PROGRAMMER IS SET TO
ON AND THE TEMPERATURE CONTROL
IS IN AN OPERATING POSITION.
PRESS FLUE OVERHEAT RESET BUTTON
(B) AND BOILER OVERHEAT RESET
BUTTON (C) FOR HEATING BELOW
FASCIA, BEHIND THE FRONT WHITE
PANEL (SEE FIG.2)
IF THE DEMAND LIGHT REMAINS OFF,
CONTACT YOUR SERVICE ENGINEER
FOR ADVICE.
A
TECHNICAL 08705 266241
LITERATURE 01905 752556
B
SERVICE 08457 256206
C
FIG.2
Advertisement
