Plug And Play - HANNspree HL326HPB User Manual

User's Manual
Allow to select the key lock: On, Off.
Key Lock
Allow you to restore the factory settings.
Reset
Sofeware
Allow you to update software using USB.
Update(USB)
SCREEN
Item Function
Press ▼ / ▲ button to select Auto Adjust, then press
Auto Adjust
OK button to auto adjust
Press ▼ / ▲ button to select Horizontal Pos., then
press OK button to enter sub-menu. Press ◄ / ►
Horizontal Pos.
button to adjust the horizontal position of image.
Press ▼ / ▲ button to select Vertical Pos., then
press OK button to enter sub-menu. Press ◄ / ►
Vertical Pos.
button to adjust the vertical position of image.
Press ▼ / ▲ button to select Clock, then press OK button
to enter sub-menu. Press ◄ / ►
Clock
button to adjust the clock.
Press ▼ / ▲ button to select Phase, then press OK
button to enter sub-menu. Press ◄ / ► button to
Phase
adjust the phase.

PLUG AND PLAY

Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities. The DDC2B is a
bidirectional data channel based on the I²C protocol. The host can request EDID information over the
DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE
MUST BE A VIDEO INPUT SIGNAL.
Operation
Press▲or▼to highlight
an item, press OK or ►
button to enter submen.
16
On / Off
Range
0~100
0~100
0~100
0~100