Remote Control - HANNspree HL326HPB User Manual

REMOTE CONTROL

Installing battery
Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the
battery is consistent with the marks "+/-" in the battery slot.
Precautions of remote control usage
Point the remote control to the receiver window. The objects between remote control and the
receiver window may disturb the normal operation.
Keep the remote control away from strong vibration. In addition, do not set or put the remote
control in direct sunshine, which may result in deformation of the remote control.
The remote control may be invalid if the receiver window is in direct sunshine or strong light; in
this case, please adjust the angle of the light or the device, or approach the remote control to the
receiver window.
The effective range of the remote control may be affected if the battery voltage is low; in this
case, please replace with a new battery; if the remote control won't be used or battery voltage is
too low, please take out the battery to avoid corrosion due to battery liquid leakage.
Do not mix different types of batteries, or used and new batteries.
Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble,
heat or burn the used batteries. Please follow the environmental protection regulations to
disposal of the batteries.
Power
Source
Cursor Key
Menu
mute Remote Control Key Instruction
Key
POWER( )
MUTE( )
▲/▼/ /
VOL+/VOL
MENU
SOURCE
Volume
/
OK
13
User's Manual
Function
Switch between normal working and
standby
Turn off the sound
▲/▼: select functions;
analog value
Turn up/down the volume
Press this key to call out the main menu
Press this key to display signal source
selection menu
select functions
/ : adjust the