Connecting To An Audio System (Dolby Digital, Mpeg2 Or Dts Amplifier) - Samsung DVD-1080P7 User Manual

C
O N N E C T I O N S
Connecting to an
1
If using an Optical cable (not included), connect the
AUDIO OUT (OPTICAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (OPTICAL)
If using a Coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL)
2
Using the video signal cable(s), connect the VIDEO, S-VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the VIDEO, S-VIDEO, COMPONENT or HDMI-DVI IN
jacks of your TV as described on pages 12 to 16.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
input your DVD player is connected to in order to hear sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 50 to 51)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Audio System (Dolby digital, MPEG2 or DTS Amplifier)
DIGITAL
jack of the Amplifier.
jack of the Amplifier.
Amplifier to select the audio
ENG-19
or Coaxial Cable
(not included)
Optical Cable
(not included)
Dolby digital or
DTS amp