Hobart ecomax Use And Maintenance Manual page 16

6.
COOKING PARAMETERS
C - DUAL CORE PROBE (SINGLEPOINT, MULTIPOINT, UNDER VA-
CUUM)
You can cook two types of products in a single cooking cycle.Proceed as
follows:
1. Insert the external core probe into the special compartment below
oven panel.
2. Insert the sharp end of the external core probe inside the product (pla-
ced on a tray inside the cooking chamber) so that the tip is approximately
in the middle of the product.
3 Insert the sharp end of the internal core probe inside the product (pla-
ced on a tray inside the cooking chamber) so that the tip is approximately
in the middle of the product.
4. Close the door of the oven making sure the external core probe re-
mains connected.
Close the oven door, press "ENTER" (Fig 1/A) MENU (Fig 1/F) to enter
the main menu.
Use the"MINUS" and "PLUS" keys (Fig 1/B) to select the DUAL CORE
PROBE function. Press "ENTER" (Fig 1/A) to confirm.
5. Select the cooking mode (Fig 1/C), temperature (Fig. 1/E), probe tem-
perature (Figure 5/E) and the desired parameters (see chap. 5).
Example: Display 3 shows "INT"
Display 4 shows "70"
6. Press the TIME key (Fig 1/E) and select the cooking mode (Fig 1/C),
the probe temperature (Fig 1/E) and the desired parameters (see chap. 5
for the external core probe.
Example: Display 3 shows "EXT"
Display 4 shows "65"
You can set the temperature of core probes up to 99° C
7 Press "TIME" button (Figure 1/E) and the "TEMPERATURE" button (Fig.
1/D) to set the temperature of the cooking chamber. Press "TEMPERATU-
RE" to confirm.
Press "ENTER" (Fig 1/A) to start the cooking cycle.
8 To exit the function press "MENU (FIG. 1/F).
9 To change the temperature of the probes, press "TIME" and repeat the
operations at points 5 and 6.
To change the temperature of the firing chamber press "TEMPERATURE"
button and repeat step 7.
When the lower temperature set is reached, the writing "END" (Fig. 1- Di-
splay 4):
When the upper temperature set is reached, the writing "END" (Fig. 1 Di-
splay 4) and "MAINTENANCE". appears on the display.
The oven maintains the lowest temperature set (Fig. 1- Display 2):
To exit and return to the main menu press "MENU" button (Figure 1/F).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 16 - 16
C
Display 1
Display 2
Display 3
D
Display 4 E
B
F
A
Fig.1