Setting The Programmed Start (Postponement) - Hobart ecomax Use And Maintenance Manual

5.
OPERATING PARAMETERS
5.6 SETTING THE FAN SPEED
Press ENTER key (Fig 1/A) Select a cooking mode (Fig 2/C):
Press the "FAN" key (Fig 2/F) and use the "MINUS" and "PLUS" keys to
select a value between 2 and 1.
Press "FAN" to confirm.
The "RISING" function can be activated (see Cooking parame-
ters "CONVECTION"). In the specific case, the fan can be set to
"ZERO".
5.7 SETTING THE PREHEATING
Press ENTER key (Fig 1/A) Select a cooking mode (Fig 2/C). Set the tem-
perature (see 5.2 SETTING THE TEMPERATURE).
Set the time (see 5.3 SETTING THE TIME).
Press the selected cooking mode for 3 seconds(Fig 2/C) and press "EN-
TER" (Fig 2/A) to start the function.
"PREHEATING" phase (Fig. 2- Display 2): 20° C greater than the
temperature set for the "CONVECTION" and "MIXED" fun-
ction,10° C greater than the temperature set for the "STEAM"
function.
When preheating is done, "LOAD" appears on the display (Fig. 2- Display
2): Open the door and insert the product. When finished loading, close the
oven door.
The set function starts.
Press the "ENTER" button (Fig. 2/A) for 3 seconds to stop the preheating
and the "MENU" button (Fig. 2/H) to return to the main menu.
5.8 SETTING FAST COOLING
To quickly lower the temperature in the oven chamber, press "ENTER" (fig. 2A) and press the current
cooking mode (Fig. 2/C). Press "TEMPERATURE" anduse the "MINUS", "PLUS" or "SCROLL" (Fig 2/B)
to set the temperature up to a minimum of 40°.
Press "ENTER" to confirm.
For example: Display 1 shows "COOLING".
When cooling is complete "END" appears on Display 2. Press "MENU" (Fig 2/H) to access the main
menu.
5.9 SETTING THE PROGRAMMED START
(POSTPONEMENT)
To proceed with this function, the clock must be set (see 5.1. 5.1 DATE/CLOCK)
Press "ENTER" (Fig 2/A) and "MENU" (Fig 2/H) to activate the main menu. Use the"MINUS" and "PLUS"
keys (Fig 2/B) to select the POST function.
Press "ENTER" and use the "MINUS" and "PLUS" to select "RECIPE" or "WASH". Press "ENTER" to
confirm (Fig 2/A).
Press "TIME" (Fig 2/E),use the "MINUS", "PLUS" or "SCROLL" keys (Fig 2/B) to select the program start
time. Press "TIME" to confirm (Fig 2/E). Press "ENTER" (Fig 2/A) and select the recipe or the washing
cycle using the"MINUS" and "PLUS" keys (Fig 2/B).
Press "ENTER" (Fig 2/A) to confirm.
The delay time flashes(Fig. 2- Display 4)
For the "RECIPE" function there is no preheating.
When the set time is reached, the selected function is started and the time countdown starts.
Press the "MENU" button (Fig. 2/H) to cancel the programmed function and return to the main menu
(Fig. 2/A).
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 13 - 13
C
Display 1
Display 2
Display 3
D
Display 4 E
B
H F G
A
Fig.2