Download Print this page

DEMA 440 Installation Instructions

Flange retrofit kit

Advertisement

Quick Links

1.
PARTS:
Stainless Steel Flange.
2.
INSTALLATION:
CAUTION: Turn off water supply before servicing.
CAUTION: When servicing the unit, be sure that replacement parts have been installed according to drawing.
The retro flange may be installed without the removal of the valve assembly from the water supply line. Refer to the figure below
throughout the installation procedure.
Remove the float from the hanger wire. Carefully remove; the four magnet housing retainer screws to prevent any loss of parts. With the
screws removed, insert the stainless steel flange between the magnet housing and the valve body. Reinstall the four retaining screws and
attach the float. The float valve may now be returned to operation.
RETURNS:
WARRANTY:
I-508
Rev. A-0600
DEMA FLANGE RETROFIT KIT
MODEL SERIES: 440
INSTALLATION INSTRUCTIONS
NO MERCHANDISE MAY BE RETURNED FOR CREDIT WITHOUT DEMA'S WRITTEN
PERMISSION. RETURN MERCHANDISE AUTHORIZATION NUMBER REQUIRED IN ADVANCE
OF RETURN.
DEMA products are warranted against defective material and workmanship under normal use and service for one
year from the date of manufacture. This limited warranty does not apply to any products which have a normal life
shorter than one year or failure and damage caused by chemicals, corrosion, improper voltage supply, physical
abuse, or misapplication. Rubber and synthetic rubber parts such as "o"- rings, diaphragms, squeeze tubing and
gaskets are considered expendable and are not covered under warranty. This warranty is extended only to the
original buyer of DEMA products. If products are altered or repaired without prior approval of DEMA, this
warranty will be void.
Defective units or parts should be returned to the factory with transportation prepaid. If inspection shows them to
be defective, they will be repaired or replaced without charge, F.O.B. factory. DEMA assumes no liability for
damages. Return merchandise authorization number, to return units for repair or replacement, must be granted in
advance of return.
DEMA FLANGE RETROFIT KIT
Pg. 1 of 2

Advertisement

loading

Summary of Contents for DEMA 440

  • Page 1 Rubber and synthetic rubber parts such as “o”- rings, diaphragms, squeeze tubing and gaskets are considered expendable and are not covered under warranty. This warranty is extended only to the original buyer of DEMA products. If products are altered or repaired without prior approval of DEMA, this warranty will be void.
  • Page 2 MODEL SERIES: 440 INSTALLATION INSTRUCTIONS MAGNET HOUSING RETRO FLANGE RETAINING MAGNET SCREWS HOLDER MAGNET SPRING ENCLOSING TUBE VALVE BODY FLOAT HANGER I-508 Pg. 2 of 2 Rev. A-0600...