Dsp-Z8 Iii - zapco DSP-Z8 III Owner's Manual

The DSP-6 and then the DSP-Z8 were designed to complement the Zapco Digital Programming
Network which allows an entire system of Zapco DC series amps and stand alone DSPs to be controlled
by a single PC screen.
For 2015, Zapco presents the DSP-Z8 III and the DSP-Z6 III. These two new DSPs are designed for the
customer who is running non-DC amps like the Zapco Z-Series or Studio Series amps.
These new models have exactly the same features as the DSP-Z8 but do not network with the DC Series
amplifiers. The two new models use a smaller compact chassis that shares a look with the Z-series amps.
The difference between the two new models is simply the number of channels. The DSP-Z8 III has 6
channels of input and 8 channels of output while the DSP-Z6 III has 4 channels of input and 6 Channels
of input.
All three Zapco DSP models share the same feature set to provide all the tools you need for fast efficient
tuning of your sound system
In this manual we will take you through the programming and control functions of the Zapco Digital
Signal Processors and the on-board DSP in the Zapco DC Series of DSP controlled amplifiers as well
networking operations of Zapco's DPN system.

DSP-Z8 III

Zapco Digital 2015
3
DSP-Z8
DSP-Z6 III