Dsp-Z6 Iii - zapco DSP-Z8 III Owner's Manual

DSP-Z6 III

The Zapco DSP-Z6 III shares the smaller chassis and dimensions with the DSP-Z8 III. The difference is that
the DSP-Z6 III has 4 channels in and 6 channels of output.
It has a similar look to the Zapco Competition amps and the Zapco Analog competition processors.
With the new chassis dimensions the DSP-Z8 III has input and output connections on opposite ends of
the unit.
The RCA inputs allow you to use the DSP-Z8 with any after market head unit, and two auxiliary inputs
allow an extra input by either RCA or SPDIF Digital. The DSP-Z6 III , like the other Zapco DSP's, The Z6 III
will also accept balanced speaker level signals from a factory amplified system to add high-end sound
to factory stereos.
The Zapco Digital functions include Input Sensitivity (Gain), Output , Crossover, Parametric Equalization,
and Time Delay. Each Reference Digital piece also has an Input Commutator, which allows you to chose
which input channels will be used for which processed output channels. The Commutator also allows
input pairs to be summed for a 2-channel mono input to any output channel. In addition, you can
combine input channels together to sum their signals into a single full range signal pair for integrating
actively crossed over signals from a factory stereo system.
All DSP functions may be applied to each channel independently or they may be applied in stereo pairs.
10