Selecting An External Device (Usb); Lcd Brightness - Samsung SCPA5 User Manual

Selecting an External Device (USB)

You can select an external device to which you want to connect the camera using the USB cable.
Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER]
[PRINTER]
5. Press the menu button twice and the menu will disappear.

LCD brightness

You can adjust the LCD brightness.
Adjusting LCD Brightness
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5. Press the menu button twice and the menu will disappear.
: Select this if you want to connect the camera to your PC.
Refer to page 105 for instructions on how to connect the camera to your
PC.
: Select this if you want to connect the camera to your printer.
Refer to page 70 for instructions on how to connect the camera to your
printer.
2592
SETUP
LAMP COMPUTER
SOUND
PRINTER
USB
BACK: SET:OK
2592
SETUP
SOUND DARK
USB NORMAL
LCD BRIGHT
BACK: SET:OK
83