Sound; Selecting An External Device (Usb) - Samsung digimax U-CA 501 User Manual

Sound

If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5. Press the menu button twice and the menu will disappear.

Selecting an External Device (USB)

You can select an external device to which you want to connect the camera using the USB
cable.
Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC.
[PRINTER]
5. Press the menu button twice and the menu will disappear.
Refer to page 98 for instructions on how to connect the camera to your
PC.
: Select this if you want to connect the camera to your printer.
Refer to page 63 for instructions on how to connect the camera to your
printer.
P 2560
SETUP
DATE TYPE LOW
IMPRINT MEDIUM
SOUND HIGH
BACK : SET : OK
P 2560
SETUP
IMPRINT
SOUND COMPUTER
USB PRINTER
BACK : SET : OK
75