Function Setting; Filter Sign; Auto Restart - Fujitsu AU*G30LRLE Design & Technical Manual

FUNCTION SETTING

„ „
Outlet direction selection
z „
Performs operation matched to the number of outlets when 4 directions are unnecessary and
outlets are blocked when the ceiling cassette is installed in a corner, etc.
4-way direction 3-way direction
Ceiling switching function
z „
Also delivers air to high ceilings by selecting the mode and raising the airflow according to the
height of the ceiling.
High ceiling (Mode 1)
*1
4.2m
*1 : AUG30L is 3.6m
Standard ...Operates at normal airflow.
Mode 1 ...Airflow becomes greater than normal.
Mode 2 ...Airflow becomes smaller than normal.

Filter sign

z „
The indoor unit displays signs to inform the user that it is time to clean the filter.
Cooling room temperature correction
z „
Heating room temperature correction
z „

Auto restart

z „
The unit will restart automatically when the current returns even when there is a power
interruption during operation.
Room temperature sensor switching
z „
Switches from room temperature judgment by room temperature sensor attached to indoor
unit body to room temperature judgment by room temperature sensor attached to the wired remote
controller.
4-way direction mode: Set when there are 4 outlets (shipped state).
3-way direction mode: Set when there are 3 outlets.
Standard ceiling (Standard)
3.2m
- (01 - 03) -
Low ceiling (Mode 2)
2.7m